Communication Gateway F-DPU110 Protocol Converter Gateway

Communication Gateway F-DPU110 is an IoT Distributed Processing Unit designed for the wireless remote and large data transfer function by public 3G/4G network.

Communication Gateway F-DPU110 uses high-performance dual-core processors and industrial-grade wireless modules, with Linux operating system as the software support platform, while providing 2 RS232/RS485, 6 RS485, 4 Ethernet LAN, 1 Ethernet WAN and 2 WIFI antenna interface, 2 3G/4G wireless interfaces, 8 digital inputs, 4 relay outputs, 2 12V controllable power outputs, optional LoRa interface, can connect serial devices, Ethernet devices and WIFI/ LoRa devices.

Communication Gateway F-DPU110 can provide comprehensive data communication processing functions including different communication interfaces such as Ethernet, standard RS232, standard RS485, WIFI, etc. for different background SCADA systems, power protection devices, various smart devices, different management systems, etc.; its main functions It is to process the upstream and downstream information, complete the forwarding of different protocols, and realize the transparent transmission of application software communication of different systems and different protocols.

parameter

Cellular Specification
Item	Content
F-DPU110
Standard and Band	Support band (optional)：TDD-LTE、FDD-LTE、EVDO、WCDMA、TD-SCDMA、CDMA1X、GPRS/EDGE
Bandwidth	LTE FDD : download speed 100Mbps,upload speed 50Mbps LTE TDD : download speed 61Mbps,upload speed 18Mbps CDMA2000 1X EVDO Rev A : download speed 3.1Mbps,upload speed 1.8Mbps WCDMA : download speed 42Mbps,upload speed 5.76Mbps TD-SCDMA : download speed 4.2Mbps,upload speed 2.2Mbps
TX power	<23dBm
RX sensitivity	<-93.3dBm

WIFI Specification
Item	Content
Standard and Band	Support IEEE802.11b/g/n, 2.4G, 22 MIMO, support AP mode, Station mode (optional) Support IEEE802.11ac, 5.8G, 22 MIMO, support AP mode, Station mode (optional)
Bandwidth	IEEE802.11b/g: the highest rate reaches 108Mbps IEEE802.11n: the highest rate reaches 300Mbps IEEE802.11ac: the highest speed up to 780Mbps
Secure encryption	Support WEP, WPA, WPA2 and other encryption methods, optional WPS function
RX sensitivity	26dBm（11b），21.5dBm（11g），20dBm（11n），16dBm（11ac）

LoRa Specification（optional）
Item	Content
Communication standards and frequency bands	support multiple frequency bands around the world (433/470/780/868/915 MHz)
Indoor/urban communication distance	2km
Outdoor/line-of-sight communication distance	9km
Tx power	<30dBm
RX sensitivity	<-140dBm
Communication theoretical rate	6 levels adjustable (0.3, 0.6, 1.0, 1.8, 3.1, 5.5Kbps)

Hardware System
Item	Content
CPU	Dual-core 880MHZ processor
FLASH	64MB SPI flash/512MB Nand flash
DDR3	512MB
TF	8GB/32GB, optional

Interface type
Item	Content
WAN	1*10/100M Ethernet port (RJ45 socket), auto MDI/MDIX, 1.5KV magnetic isolation protection
LAN	4*10/100M Ethernet ports(RJ45 socket), auto MDI/MDIX,1.5KV magnetic isolation protection
Serial port	2 RS232/RS485 port, 6RS485 port 15KV ESD protection Data bit: 5、6、7、8 Stop bit: 1、1.5(Optional)、2 Parity: none, even, odd, space(optional), mark(optional) Baud rate:2400~115200bits/s
indicator	”PWR”、“SYS”、“LAN”、“WAN”、“NET”、“Signal Strength”
I/O port	8 channels with isolated digital input, Applicable types: passive empty contact, active contact, open collector Input high level: 5~30 VDC Input low level: 0~3 VDC Input current range: DC2~20mA Resolution: 100mS 4 digital outputs Output type: relay output Contact capacity: 5A 250V AC/30V DC 2 channels 12VDC power output Output type: 12V/1A output, controllable
Antenna	Cellular: 2* Standard SMA female interface, 50 ohm WIFI/GPS: 2 Standard SMA male interface, 50 ohm, Lora: 1 Standard SMA male interface, 50 ohm(optional)
SIM/UIM	2 standard drawer type 3V/1.8V user card interface, 15KV ESD protection
Power	3-core terminal power socket with built-in reverse power protection Working voltage: 85～265VAC/DC Overload protection, reverse connection protection, redundancy protection
USB	Standard USB3.0 interface, support various USB storage
TF	Standard TF card interface, support various TF cards
Reset	Restore the router to its original factory default settings

Download

Specification

F-DPU110_Distributed_Processing_Unit TECHNICAL_SPECIFICATION_V2.0.2

Use Manual

F-DPU110_Distributed_Processing_Unit_User_Manual_V1.0.0

Specification

Use Manual

Company

Service

Contacts