F2X16-DKG Series Industrial 4G LTE Modem is a kind of cellular terminal device that provides data transfer function by GPS+GSM/WCDMA/TDD-LTE/FDD-LTE network, Industrial 4G LTE Modem also provides GPS positioning function. Industrial 4G LTE Modem adopts high-powered industrial 32 bits CPU and embedded real time operating system., it is dual serial port design, supports RS232 or RS485 port (Optional) that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial devices with only basic configuration. Industrial 4G LTE Modem also has low power consumption states. Industrial 4G LTE Modem has been widely used on M2M fields, such as intelligent substation, intelligent distribution network, smart electricity meters, intelligent interactive terminal, intelligent scheduling, intelligent home appliances, intelligent electricity building, power grids for smart cities, intelligent power generation system, smart grids (Such as new energy storage systems)and so on. |
Item | Content |
F2816-DKG FDD-LTE INDUSTRIAL 4G LTE MODEM | |
Standard and Band |
LTE FDD 2600/2100/1800/900/800MHz,700/1700/2100MHz (Optional) DC-HSPA+/HSPA+/HSDPA/HSUPA/UMTS 850/900/2100MHz ,800/850/1900/2100MHz (Optional) EDGE/GPRS/GSM 850/900/1800/1900MHz GPRS CLASS 10 EDGE CLASS 12 |
Bandwidth |
LTE FDD:Download speed 100Mbps,Upload speed 50Mbps DC-HSPA+:Download speed 42Mpbs,Upload speed 5.76 Mbps HSPA+:Download speed 21Mpbs,Upload speed 5.76 Mbps HSDPA:Download speed 7.2Mbps HSUPA:Upload speed 5.76Mbps UMTS:384Kbps |
TX power | <23dBm |
RX sensitivity | <-93.3dBm |
Item | Content |
Receiver type | 50 Channel GPS L1(1575.42MHz)C/A code WAAS,EGNOS,MSAS,GAGAN Compatible with GALILEO |
Data update rate | 1 Hz |
Accuracy | <4m CPE |
Catch | Cold start:35S Warm start:26S Hot start:2.5S |
Sensitivity | Standby:-157dBm Capture again: -157dBm Cold start:-146dBm |
Timing accuracy | RMS:30ns 99%:<60ns Granularity:21ns |
Time pulse | 0.25-1000Hz (Support configuation) |
Item | Content |
SDI |
Num.of ports:2 Port 1:RS232 Port 2:RS232(Standard)/ RS485(Optional) Serial port type :Terminal type Stop bits:1 、2 Parity: none, even, odd, Baud rate:300~115200bps |
Antenna | Standard SMA negative head antenna interface, 50 ohm |
SIM/UIM | Standard clamshell socket interface, support 1.8V/3V SIM/UIM card, 15KV ESD protection |
Indicator | Power、Module、SIM、Status |