Industrial-grade Design
Using high-performance industrial-grade wireless modules
Using high performance industrial grade 32-bit enhanced processor
Built-in real time clock (RTC)
ABS flame retardant housing
Wide power input (AC 187~242V)

Powerful Functions
Provide 3-way of leakage input, 1-way temperature input, 1-way CAN bus, 1-way RS485
Support for mass storage expansion
Interactive management: platform remote management

Stable & Reliable
WDT watchdog to ensure system stability
Input power supply with overcurrent protection and overvoltage protection

Standard Interface & Easy-to-Use
Using industrial interface, especially suitable for industrial field applications
Provide CAN bus and RS485 interface to communicate directly with the supporting monitor
Support serial software upgrade and remote maintenance

Follow the Standard
Electrostatic Discharge Immunity. It complies with the provisions of GB/T 17626.2-2006 (IEC 61000-4-2:2001), and the severity level is 3.

RF electromagnetic field radiation immunity. It meets the requirements of GB/T 17626.3-2016 (IEC 61000-4-3: 2006), and the severity level is 3.

Fast Transient Burst Immunity. It complies with the provisions of GB/T 17626.4-2008 (IEC 61000-4-4:2004), and the severity level is 3.

Surge Immunity. It meets the requirements of GB/T 17626.5-2008 (IEC 61000-4-5:2005), and the severity level is 3.

RF Conducted Immunity. It meets the requirements of GB/T 17626.6-2008 (IEC 61000-4-6:2006), and the severity level is 3.

Rupture Frequency Magnetic Field Immunity. It complies with the provisions of GB/T 17626.8-2006 (IEC 61000-4-8:2001), and the severity level is 4.

Voltage Sag, Short-term Interruption and Voltage Variation Immunity. Meets the requirements of GB/T 17626.11-2008 (IEC 61000-4-11:2004), Category 3 standards.


Product Features 
Real-time Monitoring
F-EFD100 combined electrical fire monitoring detector can simultaneously monitor 3-branch residual currents and 1-branch temperature and display the current value in real time.

Alarm Protection
F-EFD100 combined electrical fire monitoring detector will emit an acousto-optic signal alarm when the residual current value of the power circuit exceeds the limit, and upload it to the supporting monitoring equipment by wired or wireless communication.

Fault Reminder Function
When the equipment is running faulty, the system self-tests, and through the acousto-optic alarm prompts, enable operators to detect abnormal conditions of equipment operation in time to avoid unnecessary failures.

Communication Function
The detection detector comes with a variety of communication functions, and can be connected to the monitoring equipment host of our company to remote management, maintenance, control and system upgrade.